PTFE//1600/织纱

东莞市千泰塑胶原料有限公司为您提供ptfe//1600/织纱。ptfe//1600/织纱
ptfe//1600/织纱long term supply of abs, so that the different structure will show different performance, showing the toughness of elastomer rubber, as resin shows hard rigidity, can obtain high impact, impact type, general type&spe---l type of impact shock&several other varieties. specifically, with the increase in the content of rubber b (usually 5%~30%), the elasticity&impact resistance of the resin will increase, but the tensile strength, mobility, weathering resistance, etc.. the content of as (70%~95%) increases, which can improve the surface gloss, mechanical strength, weather resistance, heat resistance, corrosion resistance, electrical properties, processing performance, etc.. abs 250sg5, abs 440-345, abs 360-x39, abs 470-x60, abs 180-x18, abs 450-x21, abs 360-x11
pbt b3235 supply pbt american fire retardant grade 357m, 357u, 357 (ul94 v-0) ge.
the supply of pbt japan dongli 1401x34; enhanced 1101g-30,30%gf, 310seo-1001, dr48-111, standard model; dr48-70011401x06, pbt japan dongli 1494x02 non enhanced v-0pbt technology, english poly benzothiazole
pbt technology is based on the definition of ieee802.1ah (pbb providerbackbonebridge provider backbone bridge) technology, ieee pbt technology called pbb-t (provider backbone bridge traffic engineering, supporting traffic engineering provider backbone bridge). pbb is also called mac-in-mac, is a kind of mac stack technology based on user mac is encapsulated in the mac operators, through the two package to isolate user traffic, enhance the security of the ethernet scalability&service. the key to pbb is the introduction of a 24 bit i-tag (business instance tag) in the mac-in-mac package to identify the business.
some advantages&disadvantages of /pom 1 advantages, with high mechanical strength&rigidity; fatigue strength of 2 zui high; 3, environmental resistance, resistance to you of soluble ji preferred; 4, resistance to repeated impact resistance; 5, wide temperature range (-40 ~120 deg c); 6, good electrical properties; 7, good recovery; 8, with self lubricity, good abrasion resistance, excellent dimensional stability; 9. the disadvantage of corrosion by strong acid, poor resistance, poor adhesion, thermal deco-ition&softening temperature is close to the limited oxygen index.
pc, c, the injection pressure is too low, improve the injection pressure
d, die design is not reasonable, increase the runner&gate size
e, forming the low temperature - increasing barrel temperature
, 6 opacity
a, raw material moisture - drying materials
b, lower die temperature - raising mold temperature
c, material thermal deco-ition - reduce the forming temperature
7, weld line
a, die design is not reasonable, the ring gate&gate
b, lower die temperature - raising mold temperature
c, excessive mold release agent -- reducing release agent dosage
d, forming the low temperature - increasing barrel temperature
8, bracking
a, mold temperature is too low, increasing the die temperature
b, forming the low temperature - increasing barrel temperature
the relative molecular weight of c, the material is too small - to choose material
pa6 fn727, pa6 fn727a, pa6 pluspls93g35dh1bk, pa6 st7301, pa6 st811hs
pa6 very high thermal stability, can be 270 degrees in the wave soldering tin is not tin). a wide range of temperature&frequency range of constant electrical nature, to ensure that the use of equipment safety of 100 percent of the 5. fold 5) with high surface quality, smooth surface. high performance engine peripheral parts of automobile reinforced polyamide co-ite material around the engine parts, such as intake manifold, the engine cover, can replace the traditional metal materials, in order to meet the requirements for use in motor peripheral components.

     联系时请说明是在云商网上看到的此信息，谢谢！
     联系电话：0769-33214396，15818465693，欢迎您的来电咨询！
     本页网址：https://www.ynshangji.com/g11456598/
     推荐关键词： eva, eea, eba, pc, eea