ppr水管左热右冷
左热右冷这是标准施工，厦门ppr热熔管件，只不过是难免遇到不走心的工人，装反了。尤其淋浴的位置，会让你很痛苦。
ppr water pipe left hot right coldleft hot right cold thiss the standard practices， but it is inevitable to encounter workers do not pay attention， installed the reverse. espe-lly the location of the shower， it will make you very painful.
现在ppr水管的熔焊器制作合格的不多，因为一是缺少部件；二是生产厂家为了节省材料，一些厂家的底座采用很薄的白铁皮，ppr管件热熔，造成上重下轻而不稳。操作时，往往需要另一个工人帮助稳住。
at present，ppr热熔管件生产， there are few qualified welding tools for ppr water pipes because of the lack of parts; second， in order to save materials， some manufacturers use very thin sheet iron for the base， which makes the top heavy&the bottom light&unstable. when operating， it often needs another worker to help stabilize.
ppr管熔管的时候，发现成功率不高，主要为接管后发现会有点歪，个人比较主义，所以不满意的全部剪掉重来，这样导致会浪费很多接头。在熔管的时候，ppr热熔管件厂家，先用ppr管剪刀切好ppr管。
when the ppr pipe was melted， it was found that the success rate was not high. the main reason was that it would be a little crooked after taking over. it was individualistic， so it was not satisfied to cut all the parts&start over again， which would lead to a lot of joint waste. when melting the pipe， first cut the ppr pipe with ppr pipe scissors.
|
登录后台
