POM.S9363.÷

东莞市千泰塑胶原料有限公司为您提供pom.s9363.÷。pom.s9363.÷
pom.s9363.÷long term supply of pe blending modification is difficult because of the poor compatibility of pe resin. in order to improve the compatibility of the two phases, it is usually necessary to introduce an intermediate substance. such as hdpe&pp is not compatible, to make these two kinds of resin blend, can introduce intermediate substances such as ethylene propylene rubber (ethylene&propylene copolymer, also known as two ethylene propylene rubber) to improve its compatibility.
pp-h resin used in the production of plastic pipe is also modified by blending. it is a homopolymer of pp resin based toughening by introducing a certain amount of modifiers, such as pp resin&likepolybutadiene rubber like substance/material blending,?? pp/1621/ schulman pp/1579/ schulman plastic plastic?? pp/1259/ schulman pp/984/ schulman pp/3701/ plastic plastic?? schulman plastic? pp/1692/ schulman pp/3491/ schulman pp/3726/ plastic plastic? schulman? plastic pp/3476/ plastic pp/7001/ schulman? schulman? schulman pp/3045/ plastic plastic pipe main purpose?
1, the building of cold&hot water systems, including central heating system;
2, the building heating system, including floor, wall panels&radiant heating system;
3, can be directly drinking pure water supply system;
4, central (centralized) air conditioning system;
5, transmission/discharge of chemical media&other industrial piping systems
application of pa6 in automobile industry
with high performance of interior&exterior parts of automobile reinforced polyamide co-ite material has excellent weather resistance, good paint performance&outstanding performance, in order to meet the requirements for use in the interior&exterior of the reinforced polyamide materials should have the following requirements: 1). high heat resistance, long-term use; 2) with excellent rigidity&toughness; 3). to meet the changing of temperature&humidity&strong under great strain; 4). excellent dimensional stability, anti warping effect;
pc "/pc" plastic plastic (polycarbonate)
polycarbonate polycarbonate is a common everyday material. because of its transparent&excellent impact resistance, application of daily common with cds, glasses, bottles, glass plates, goggles, bullet proof glass, bank headlights&so on, animal cages pet cage. pc is a polycarbonate "notebook computer shell material used, its raw material is oil, the polyester factory after a polyester particles, the plastic processing plant was finished, from a practical point of view, its thermal performance is better than the abs plastic better heat dispersion uniformity.
pom pom chinese caused productivity growth cannot meet the demand of other country is: pom market growth, based on chinese pom production is relatively weak; in addition, pom is the capital&technology intensive materials such as chemical products, chinese huge market attracted much attention abroad, other nations have been to the chinese products to occupy the market, to transfer technology, the technical level of chinese pom increased slowly
.
     联系时请说明是在云商网上看到的此信息，谢谢！
     联系电话：0769-33214396，15818465693，欢迎您的来电咨询！
     本页网址：https://www.ynshangji.com/cp/4182416.html
     推荐关键词： eva, eea, eba, pc, eea